cyanoacrylate adhesive
Purpose:
Instant dry welding agent is suitable for bonding and repairing materials such as rubber, plastic, metal, ceramics, wood, etc., for shoes, toys, furniture, appliances, accessories, handicrafts, etc.
Usage:
1. Clean the surface first to remove dust, oil stains, rust, etc. When bonding metal, it is best to roughen it first. Ensure that the adhesive surface is dry and free from standing water or excessive humidity.
2. Open the front cover and unclog the adhesive outlet at the tip for use.
3. Drop a small droplet of adhesive on the surface to be bonded, immediately proceed with bonding, and keep it until it hardens. When bonding, first apply the adhesive to one side, and then bond the other side.
4. Clean the glue outlet after use, cover it with a lid, and store it in a cool, dry place or refrigerated.


Metal cold solder

Purpose:
Suitable for bonding and repairing metal containers, pipelines, and equipment components.
Usage:
1. Clean the adhesive surface first, remove dust, oil stains, etc. from the adhesive surface, ensure that the adhesive surface is dry, without water accumulation or high humidity.
2. Unscrew the rubber cap, install the mixing nozzle, and install the two-component push rod.
3. Press the push rod firmly to start applying glue and position it within 8 minutes.
4. If there is still unused glue, the mixing nozzle needs to be removed to clean the glue outlet, the glue outlet cover needs to be replaced, and the glue should be stored in a cool and dry place.


Stone repair adhesive

Purpose:
Suitable for self adhesion and mutual adhesion of materials such as rock slabs, quartz stones, marble, stone slabs, ceramic tiles, metals, ceramics, cement, hard plastics, etc.
Usage:
1. Clean the adhesive surface first, remove dust, oil stains, etc. from the adhesive surface, ensure that the adhesive surface is dry, without water accumulation or high humidity.
2. Unscrew the rubber cap, install the mixing nozzle, and install the two-component push rod.
3. Press the push rod firmly to start applying glue and position it within 8 minutes.
4. If there is still unused glue, the mixing nozzle needs to be removed to clean the glue outlet, the glue outlet cover needs to be replaced, and the glue should be stored in a cool and dry place.


Porcelain white anti mold adhesive

Purpose:
Anti mold glue is suitable for damp environments such as bathrooms, toilets, kitchens, basements, home trimming, swimming pools, and water feature areas. It can prevent moisture infiltration and reduce mold growth.
Usage:
1. Clean the surface first, remove dust, oil stains, etc. from the surface, ensure that the adhesive surface is dry, without water accumulation or high humidity.
2. Twist open the lid and install the conical glue nozzle. Adjust the width of the glue application gap and cut out the glue nozzle at a 45 degree angle.
3. Tilt the glue nozzle at an angle of 45 degrees inward, and apply glue forward from the tail of the toothpaste tube in sequence. After applying glue, clean up any excess residue.
4. If there is still unused glue, the glue nozzle needs to be removed to clean the glue outlet, the mixing port cover should be replaced, and stored in a cool and dry place.


Transparent glass adhesive

Purpose:
Transparent sealant is suitable for maintenance and sealing of fish tanks, photo frames, furniture glass, display cabinet glass, door and window glass, etc. that require transparency.
Usage:
1. Clean the surface first, remove dust, oil stains, etc. from the surface, ensure that the adhesive surface is dry, without water accumulation or high humidity.
2. Twist open the lid and install the conical glue nozzle. Adjust the width of the glue application gap and cut out the glue nozzle at a 45 degree angle.
3. Tilt the glue nozzle at an angle of 45 degrees inward, and apply glue forward from the tail of the toothpaste tube in sequence. After applying glue, clean up any excess residue.
4. If there is still unused glue, the glue nozzle needs to be removed to clean the glue outlet, the mixing port cover should be replaced, and stored in a cool and dry place.


Edge sealing glue

Purpose:
Edge sealing adhesive is suitable for edge sealing of skirting boards, window sills, door frame seams, curtains, window sills, ceilings, door frames, wallpaper and other home decorations.
Usage:
1. Clean the surface first, remove dust, oil stains, etc. from the surface, ensure that the adhesive surface is dry, without water accumulation or high humidity.
2. Twist open the lid and install the conical glue nozzle. Adjust the width of the glue application gap and cut out the glue nozzle at a 45 degree angle.
3. Tilt the glue nozzle at an angle of 45 degrees inward, and apply glue forward from the tail of the toothpaste tube in sequence. After applying glue, clean up any excess residue.
4. If there is still unused glue, the glue nozzle needs to be removed to clean the glue outlet, the mixing port cover should be replaced, and stored in a cool and dry place.