nine hundred
Product Description:
  & nbsp; & nbsp; This product is a single component, mainly composed of alpha cyanoacrylate, a pure reactive monomer. It solidifies instantly when exposed to moisture in the air and can be bonded in just a few seconds to minutes (depending on the material being bonded or the ambient temperature). No need for heating, easy to use, high adhesive strength, and excellent flexibility. Suitable for self-adhesive and mutual adhesion of rubber, plastic, glass, porcelain, metal, etc., with good temperature resistance, water resistance, and oil resistance.
Product Usage:
nine hundred and one
Product performance:& nbsp;
nine hundred and two thousand nine hundred and three
usage method:
  & nbsp; The surface of the adhered object must be dry and clean& nbsp;
  & nbsp; 2. Apply the adhesive solution to the surface of the object to be bonded, let it air dry for 3-5 seconds, quickly position and bond it, and after a few seconds or minutes, it can be firmly bonded. After 24 hours at room temperature, it reaches higher strength.
  & nbsp; 3. The amount of adhesive should not be too much, and the recommended amount for coating is generally 4-6mg/cm2& nbsp;& nbsp;
matters needing attention:
  & nbsp; 1. This product is solvent-free and will solidify instantly when exposed to moisture in the air. Therefore, special care should be taken when using to avoid contact with the skin and eyes. If it comes into contact with the skin, it can be washed away by soaking it in acetone or warm water; If accidentally entering the eyes, immediately rinse with plenty of water and seek medical treatment immediately; If ingested by mistake, seek medical attention immediately. Do not allow children to come into contact, immediately seal the bottle tightly after use.
  & nbsp; & nbsp; 2. Store at low temperature (refrigerated) and dry place, with a shelf life of 6 months& nbsp;
Packaging specifications:< br />
20g/bottle, 10 bottles/box, 150 bottles/box
Declaration:
  & nbsp; & nbsp; The technical parameters mentioned in this article are typical values and are not used as product acceptance criteria. They are for reference only. The above data was obtained under standard laboratory conditions, and our company guarantees its reliability. However, due to different working conditions used by users, different surface states of materials, and different curing conditions, some changes in actual performance data are normal phenomena. Storage conditions, transportation, and other factors can all affect the stability, physical and mechanical properties of the adhesive. We are not responsible for any results obtained by anyone using methods beyond our control. It is recommended that users conduct experiments based on the data provided in this article before formal use.