Product information:
  HY412 fast curing epoxy structural adhesive is easy to use and has good resistance to media. HY412 fast curing epoxy structural adhesive has impact resistance, peel resistance, and good toughness, which is more than twice the general bonding strength. HY412 fast curing epoxy structural adhesive has uniform stress distribution and no thermal impact or deformation on equipment components. HY412 fast curing epoxy structural adhesive can be widely used for bonding various materials and has high bonding strength.
Operational matters:
1. Surface treatment: Clean the adhesive surface until there is no rust, water, or oil stains. For severely corroded surfaces, they must be polished
2. Mix the A and B components according to the specified weight ratio, mix thoroughly, and make the color completely consistent.

3. Coating: Apply the mixed adhesive evenly onto the surface to be bonded, align and bond together
4. Curing must be done within the specified time before it can be put into use. When the ambient temperature is below 15 ℃, the curing time can be appropriately extended. Reaching higher intensity at room temperature for 7 days. Keeping at 80 ℃ for 6 hours can not only shorten the curing time, but also achieve better coating performance
5. It is not advisable to mix too much each time, and the mixed adhesive should be used up within the initial solidification time
6. If the adhesive sticks to the hand or tool, it can be cleaned off with solvents such as cleaning agents and acetone before curing
7. The adhesive is a safe and non-toxic substance after curing, and should not come into contact with the skin before curing. Children are strictly prohibited from playing
8. Store in a cool and dry place, with a shelf life of one year.