Performance Usage:
This product is an oil resistant silicone sealant, semi flowing. After curing, it becomes a flexible adhesive layer that is resistant to high and low temperatures (-60-250 ℃), aging, and does not corrode the workpiece. It can be used as a matching adhesive for various automotive internal combustion engine and diesel engine manufacturers, and can be used for water, gas, and oil sealing of gearbox covers, front and rear axles, and front and rear end caps in power, chemical, mechanical, and automotive industries.
nine hundred

Usage:
1. Clean the surface: Clean the sealed surface thoroughly, removing rust, dust, oil stains, etc
2. Shi & nbsp; & nbsp; Glue: Squeeze the glue onto a clean sealing surface, apply it as a continuous strip, and assemble it within 20 minutes
3. Solid & nbsp; & nbsp; Transformation: At room temperature, the adhesive layer will lose adhesion on the surface within 20-40 minutes, and the 3mm diameter adhesive strip will fully cure within 24 hours
4. Attention: Unused glue should be immediately sealed and stored by tightening the cap. When reusing, if there is a slight crust on the sealing area, it can be removed without affecting normal use
5. Storage& nbsp; & nbsp; Storage: Store in a cool, dry and sealed place for one year