-
-
kitchen and bathroom anti mold adhesive
R998 grout kitchen and bathroom anti mold adhesive is a single component, neutral, room temperature curing silicone sealant. Excellent anti mold performance, non corrosive to metals, ceramics, and coated glass, excellent adhesion to most building materials without primer, and excellent weather aging resistance.
- Product1
DESCRIPTION
This product is a single component, neutral, room temperature cured silicone sealant. Excellent anti mold performance, non corrosive to metals, ceramics, and coated glass, excellent adhesion to most building materials without primer, and excellent weather aging resistance.
nine hundred
Product Features
O single component, easy to use
Excellent antibacterial and anti mold performance, anti mold level 0
Excellent high and low temperature resistance and weather aging resistance
Neutral adhesive, non polluting to the environment, and non corrosive to the adhered surface
O can produce good adhesion to most building materials without primer
Main purpose
Installation of waterproof, anti mold and sealing for various kitchen utensils and sanitary ware
Moisture and mold proof sealing of food cold storage
Sealing of damp areas in the workplace
Specification
The product complies with the GB/T14683 standard, and the performance indicators are shown in the following table:
nine hundred and one
Usage & nbsp;& nbsp;
Before use, the adhered surface must be cleaned with solvent to make it clean, dry, and free of dirt.
O can be directly extruded and used under the conditions of 10 ℃~50 ℃.
During construction, protective tape must be used to prevent sealant from contaminating the joint area.
Use a manual or pneumatic glue gun to inject glue evenly in the same direction along the seam. When using a pneumatic gun, the operating pressure should be adjusted to 0.2~0.4MPa to prevent the formation of bubbles during glue injection.
When the surface of the sealant has not yet peeled, use appropriate force to flatten the sealant onto the backing material and joint surface, and repair the sealant surface flat.
After the construction is completed, remove the protective tape. Do not use liquids such as water, soapy water, or alcohol to help level.
Packaging specifications
Plastic hard pack: 300ml/pack, 25 packs/box
Intestinal soft pack: 590ml/pack, 20 packs/box
keep in storage
Store in a cool, ventilated, and dry place below 27 ℃ for a storage period of 9 months.
This product is a single component, neutral, room temperature cured silicone sealant. Excellent anti mold performance, non corrosive to metals, ceramics, and coated glass, excellent adhesion to most building materials without primer, and excellent weather aging resistance.
nine hundred
Product Features
O single component, easy to use
Excellent antibacterial and anti mold performance, anti mold level 0
Excellent high and low temperature resistance and weather aging resistance
Neutral adhesive, non polluting to the environment, and non corrosive to the adhered surface
O can produce good adhesion to most building materials without primer
Main purpose
Installation of waterproof, anti mold and sealing for various kitchen utensils and sanitary ware
Moisture and mold proof sealing of food cold storage
Sealing of damp areas in the workplace
Specification
The product complies with the GB/T14683 standard, and the performance indicators are shown in the following table:
nine hundred and one
Usage & nbsp;& nbsp;
Before use, the adhered surface must be cleaned with solvent to make it clean, dry, and free of dirt.
O can be directly extruded and used under the conditions of 10 ℃~50 ℃.
During construction, protective tape must be used to prevent sealant from contaminating the joint area.
Use a manual or pneumatic glue gun to inject glue evenly in the same direction along the seam. When using a pneumatic gun, the operating pressure should be adjusted to 0.2~0.4MPa to prevent the formation of bubbles during glue injection.
When the surface of the sealant has not yet peeled, use appropriate force to flatten the sealant onto the backing material and joint surface, and repair the sealant surface flat.
After the construction is completed, remove the protective tape. Do not use liquids such as water, soapy water, or alcohol to help level.
Packaging specifications
Plastic hard pack: 300ml/pack, 25 packs/box
Intestinal soft pack: 590ml/pack, 20 packs/box
keep in storage
Store in a cool, ventilated, and dry place below 27 ℃ for a storage period of 9 months.
