& nbsp; & nbsp; What should be noted when using glass glue? Here are five precautions to avoid improper use. These are also things we must clarify to avoid inappropriate use of glass glue and shorten the service life of decoration materials. The author has summarized several precautions for using glass glue, hoping to be helpful to you.
nine hundred
  & nbsp; & nbsp; How to use glass glue correctly?
  & nbsp; & nbsp; Single component and two-component glass adhesives are generally divided into single component and two-component. Generally speaking, single component silicone glass adhesive can be used immediately by applying it directly from the adhesive gun to the desired surface, which is very convenient. Both of the above components need to be prepared before use, so in order to save time and convenience, home decoration usually chooses one component.
nine hundred and one
  & nbsp; & nbsp; When glass is glued together, it gradually bonds from the surface to the inner layer, and the adhesion time of different adhesives varies. Ordinary acidic adhesive and neutral transparent adhesive take 5-10 minutes, while neutral variegated adhesive takes 30 minutes. If repair or color correction is needed, it must wait until the glue dries. Then continue.
  & nbsp; & nbsp; The curing time of glass adhesive increases with the increase of bonding thickness, and the curing time also increases accordingly. For example, a 12mm thick acidic glass adhesive takes 3.4 days to fully cure. When using glass glue, be sure to check if it is completely cured and firmly bonded before use.
nine hundred and two
  & nbsp; & nbsp; Before using glass glue, first clean the bonding surface to keep it clean, then apply a layer of plastic tape near the interface, install the pointed tube, and open and close it by 45 degrees;, Install the glue gun along the seam by 45 degrees; Squeezing the adhesive material from the corner to ensure full contact between the adhesive and the surface of the substrate, and to tightly seal the adhesive contact. Finally, remove the tape, cut it off with a blade, and then tear it open.
  & nbsp; & nbsp; Endless glass glue should also be stored carefully, preferably in a cool and dry room below 30 ℃, so that the glass glue can be properly stored.