& nbsp; & nbsp; Main raw materials of MS adhesive



  & nbsp; & nbsp; The main raw materials of MS glue include: alkyl terminated polyether (MS prepolymer), plasticizers (dioctyl phthalate, abbreviated as DOP; dibenzyl phthalate, abbreviated as DCP; dibutyl phthalate, abbreviated as DBP, etc.), gas-phase white carbon black, silane coupling agent, catalyst, silane coupling agent, anti-aging additive, water removal agent, etc.
nine hundred


  & nbsp; & nbsp; The strength of MS prepolymer itself is not high. If it is used to prepare sealant, fillers that can provide certain reinforcement must be added. The type and amount of filler significantly affect the mechanical and rheological properties of the sealant. In the preparation of transparent MS adhesive, white carbon black is usually used as a reinforcing filler< br />




  & nbsp; & nbsp; The main function of plasticizers is to weaken the van der Waals forces between polymer molecules, thereby increasing the mobility of polymer chains and reducing their crystallinity. This increases the shaping of polymers, resulting in a decrease in their hardness, modulus, softening temperature, and brittleness temperature, as well as an increase in elongation, flexibility, and flexibility. Adding DOP to sealant can increase fluidity, reduce hardness, and adjust modulus. However, excessive addition can not only cause migration and leakage of DOP, but also affect the sagging and mechanical properties of the sealant.
nine hundred and one


  & nbsp; & nbsp; Catalysts have two main functions



  & nbsp; & nbsp; Accelerate crosslinking curing at room temperature and shorten curing time; Endow the adhesive with good storage stability. MS gel catalysts mainly include stannous octoate, tin butyrate, dibutyltin diacetate, dibutyltin dioctate, chelating tin, dibutyltin dilaurate, trialkylamine, etc. The most common catalyst among them is dibutyltin dilaurate< br />


  & nbsp; & nbsp; The molecules of silane coupling agents have two different functional groups with different chemical properties. The alkoxy group at one end can react with moisture in the air to generate active silanol groups, which can then undergo condensation reactions with hydroxyl groups on the surface of the substrate to form stable chemical bonds; The reactive functional groups on the other end can react and bind with the polymer, forming a bridge like effect between the sealant and the substrate. Meanwhile, silane coupling agents can also serve as crosslinking agents for polymer curing reactions, improving the crosslinking density of the final MS adhesive product.
nine hundred and two


  & nbsp; & nbsp; The molecular chains of MS polymers are mainly composed of C& C key and C‐ Composed of O, its bond energy is relatively high compared to Si— The low O bond makes it easier to break under UV light, which can affect the aging resistance of MS adhesive. Therefore, it is necessary to add anti-aging additives to the formulation system to enhance its aging resistance< br />




  & nbsp; & nbsp; The moisture curing mechanism of single component MS sealant determines that the less moisture in its system, the better, ensuring that its performance remains basically unchanged during the storage period (360 days). Ethylene trimethoxysilane (WD-21) or ethylene triethoxysilane is commonly used as a sealant water removing agent. Due to its high reactivity with water, the alkoxysilane can quickly consume the water in the system and improve the storage stability of the sealant.