Product information:< br />
  & nbsp; & nbsp; HY411 epoxy high-strength structural adhesive is easy to use and has good resistance to media. HY411 epoxy high-strength structural adhesive has impact resistance, peel resistance, and good toughness, which is more than twice the general bonding strength. HY411 epoxy high-strength structural adhesive has uniform stress distribution and no thermal impact or deformation on equipment components. HY411 epoxy high-strength structural adhesive can be widely used for bonding various materials and has high bonding strength.
nine hundred
Operational matters:
1. Surface treatment: Clean the adhesive surface until there is no rust, water, or oil stains. For severely corroded surfaces, they must be polished< br />
2. Mix the A and B components according to the specified weight ratio, mix thoroughly, and make the color completely consistent.

3. Coating: Apply the mixed adhesive evenly onto the surface to be bonded, align and bond together< br />
4. Curing must be done within the specified time before it can be put into use. When the ambient temperature is below 15 ℃, the curing time can be appropriately extended. Reaching higher intensity at room temperature for 7 days. Keeping at 80 ℃ for 6 hours can not only shorten the curing time, but also achieve better coating performance< br />
5. It is not advisable to mix too much each time, and the mixed adhesive should be used up within the initial solidification time< br />
6. If the adhesive sticks to the hand or tool, it can be cleaned off with solvents such as cleaning agents and acetone before curing< br />
7. The adhesive is a safe and non-toxic substance after curing, and should not come into contact with the skin before curing. Children are strictly prohibited from playing< br />
8. Store in a cool and dry place, with a shelf life of one year.