nine hundred
Technical parameter table:
nine hundred and one
Product Description:
HY566 is a single component modified polyvinyl chloride coating, abbreviated as PVC coating, which has the advantages of solvent-free, isocyanate free, anti pollution after curing, green environmental protection, excellent heat resistance and anti-aging ability. Suitable for coating and protecting the anti stone impact parts of car chassis, train carriages, and other equipment. This product meets environmental requirements and does not contain harmful substances in GB18583 "Limits of Hazardous Substances in Adhesives for Interior Decoration Materials". It complies with EU ROHS and REACH environmental standards and German automotive adhesive environmental standards& nbsp;
Product Features:
♦ Solvent free, silicone free, isocyanate free, non-toxic, neutral and environmentally friendly.
♦ Excellent resistance to stone impact.
♦ No need for primer, suitable for most metals such as aluminum, painted steel plates, and PVC ABS,、 Polyester materials have excellent adhesive properties.
♦ Excellent weather resistance, aging resistance, and superior tensile and compressive recovery.
Curing mechanism:
HY566PVC sealant is cured by heating. The higher the temperature, the faster the curing; The general heating temperature is 160-180 ℃, and the time is about 30 minutes. Customers can choose according to the actual operating process.
Chemical resistant medium:
The product can withstand freshwater, sewage, wastewater, calcium carbonate aqueous solution, cleaning agents, low acidity, corrosive aqueous solution, etc. for a long time, and can withstand mineral oil, vegetable oil, fat, fuel, etc. for a short time. It is not resistant to organic solvents, paint thinners, high concentrations of acid and alkali, etc.
Application scope:
Suitable for coating and protecting the anti stone impact parts of car chassis, train carriages, and other equipment.
Usage:
1. The sprayed surface should be free of oil stains, dust, impurities, etc;
2. Spray the coating evenly according to the process requirements, with the thinnest part greater than 1mm; When using a pneumatic gun, the air pressure should be controlled at 0.4~0.8Mpa;
3. The product can be repaired using traditional methods after curing.
Attention:
♦ Avoid construction in environments below 5 ℃
♦ For special chemical reactions, please contact our technical department
Packaging specifications:
Plastic bucket: 5 gallons (approximately 25kg)
Iron drum: 250kg
Storage method:
It must be stored in a low-temperature and dry environment with a shelf life of 3 months.